Views: 0 Author: Mancy Li Publish Time: 2023-05-17 Origin: Zhongshan Yishang Metal Products Co., Ltd
Hello! Here is Serena He from Yishang Metal. Today I want to introduce Sheet Metal Fabrication Metal Panel Tapping machining process to you.
Tapping treatment in sheet metal processing is the treatment of making threaded holes in the sheet metal parts. This treatment can make the sheet metal parts more firmly connected with other parts, and also can facilitate disassembly and maintenance.
The tapping process is usually done by using a tapping tool. The specific steps are as follows:
According to the location and size of the tapping to be made, use a drill bit to drill holes in the sheet metal parts.
Select a suitable tapping tool, insert it into the hole and rotate the tool to make the tapping.
Check the quality and size of the threaded hole to see if it meets the requirements, and if needed, perform subsequent processing such as grinding and polishing.
It should be noted that when performing the tapping process, the appropriate tapping tool and tapping parameters need to be selected based on factors such as the material and thickness of the sheet metal part to ensure the quality and effectiveness of the threaded hole. It is also necessary to pay attention to safe operation to avoid accidents.
Translated with www.DeepL.com/Translator (free version)
If you have similar projects that require us to customize, please feel free to contact us via email: huxanhe@zsyishang.com.