 |
YS-1000016
100 Pcs
Experience Since 1996
ISO9001:2015
| Quantity: | |
|---|---|
| NO. | YS-1000016 | ||
| Optional Material | 1) Steel, mild steel, SPCC,stainless steel 2) Acrylic plate | ||
| Thickness | 0.8mm, 1.0mm, 1.5mm, 2.0mm and any thickness. | ||
| Size | 1) Normal size: 150 * 5.0mm, 200 * 5.0mm, 250 * 8.0mm 2) Customized size: it is recommended that the maximum size should not exceed 250mm, otherwise it is not beautiful. | ||
| Drawing Format | 3D/CAD/Dwg/IGS/STP | ||
| Middle Part | Power supply:Wire plug type: durable, suitable for display rack with power outlets around, the position is not flexible enough. Led Lights：Applicable type: LED strip, with strong regulation, uniform distribution and low cost, it is not recommended to use other types of LED lights. Article Strips：Thickness: the recommended range is 1.0mm or 2.0mm. Thicker than 3.0mm will hinder light penetration. Color:Translucent color: our company adopts translucent blue acrylic. | ||
| Hook Applicable types | 1) Sngle-layer hook: black protective rubber cap is on the front end 2) Double hook: the upper layer contains PVC label, and the advertising paper in the label can be replaced freely. The lower layer hangs the headset, and the front end also has a black protective rubber cap. | ||
| Installation location | 1) Fixed position: there are only 6 fixed hook holes on each side 2) Movable position: each side is made into a form of hole-board, and the hook position can be moved at will. | ||
| U-shaped acrylic One u-shaped acrylic display one earphone, the purpose is to facilitate customers to listen to the earphone. 1. Quantity: one or two u-shaped acrylic sheets can be selected according to actual needs. 2. Thickness: 3.0mm-5.0mm is available. No less than 3.0mm is recommended. 3. Color: transparent is generally adopted, and other colors can be selected according to brand characteristics. It is suggested to use transparent colorless or transparent color. 4.Shape: the U shape is good for the stability of the headset, and other shapes such as round shape and trapezoid shape can also be selected according to the characteristics of the headset. | ||
 | Acrylic Cover Plate Acrylic cover plate is located below the u-shaped acrylic, its role is to seal the top and support the u-shaped acrylic or header. 1. Shape: our company adopts diamond design, matching with the bottom. Round, square and other shapes are also available. 2. Thickness: our company adopts a moderate 8.0mm, which can be selected from 5.0mm to 10.0mm. 3. Color: according to the brand characteristics can choose transparent colorless or transparent color, do not recommend the use of opaque material is not high-grade. | ||
 | Bottom 1) Shape: our company adopts three-dimensional regular hexagon, and can also choose round, square and so on according to customers' preferences. 2) Thickness of cold-rolled plate: it is generally 1.0mm - 2.0mm thick, and it is not recommended to be less than 1.0mm, otherwise it is unstable. 2. Non-slip feet 1) Adjustable non-slip foot: adjust the distance between the bottom of the product and the cabinet surface, suitable for the display rack containing electronic products. 2) Non-adjustable non-slip foot: the distance between the bottom of the product and the cabinet surface is fixed, which is suitable for the display rack without electronic products. | ||
| NO. | YS-1000016 | ||
| Optional Material | 1) Steel, mild steel, SPCC,stainless steel 2) Acrylic plate | ||
| Thickness | 0.8mm, 1.0mm, 1.5mm, 2.0mm and any thickness. | ||
| Size | 1) Normal size: 150 * 5.0mm, 200 * 5.0mm, 250 * 8.0mm 2) Customized size: it is recommended that the maximum size should not exceed 250mm, otherwise it is not beautiful. | ||
| Drawing Format | 3D/CAD/Dwg/IGS/STP | ||
| Middle Part | Power supply:Wire plug type: durable, suitable for display rack with power outlets around, the position is not flexible enough. Led Lights：Applicable type: LED strip, with strong regulation, uniform distribution and low cost, it is not recommended to use other types of LED lights. Article Strips：Thickness: the recommended range is 1.0mm or 2.0mm. Thicker than 3.0mm will hinder light penetration. Color:Translucent color: our company adopts translucent blue acrylic. | ||
| Hook Applicable types | 1) Sngle-layer hook: black protective rubber cap is on the front end 2) Double hook: the upper layer contains PVC label, and the advertising paper in the label can be replaced freely. The lower layer hangs the headset, and the front end also has a black protective rubber cap. | ||
| Installation location | 1) Fixed position: there are only 6 fixed hook holes on each side 2) Movable position: each side is made into a form of hole-board, and the hook position can be moved at will. | ||
| U-shaped acrylic One u-shaped acrylic display one earphone, the purpose is to facilitate customers to listen to the earphone. 1. Quantity: one or two u-shaped acrylic sheets can be selected according to actual needs. 2. Thickness: 3.0mm-5.0mm is available. No less than 3.0mm is recommended. 3. Color: transparent is generally adopted, and other colors can be selected according to brand characteristics. It is suggested to use transparent colorless or transparent color. 4.Shape: the U shape is good for the stability of the headset, and other shapes such as round shape and trapezoid shape can also be selected according to the characteristics of the headset. | ||
| Acrylic Cover Plate Acrylic cover plate is located below the u-shaped acrylic, its role is to seal the top and support the u-shaped acrylic or header. 1. Shape: our company adopts diamond design, matching with the bottom. Round, square and other shapes are also available. 2. Thickness: our company adopts a moderate 8.0mm, which can be selected from 5.0mm to 10.0mm. 3. Color: according to the brand characteristics can choose transparent colorless or transparent color, do not recommend the use of opaque material is not high-grade. | ||
| Bottom 1) Shape: our company adopts three-dimensional regular hexagon, and can also choose round, square and so on according to customers' preferences. 2) Thickness of cold-rolled plate: it is generally 1.0mm - 2.0mm thick, and it is not recommended to be less than 1.0mm, otherwise it is unstable. 2. Non-slip feet 1) Adjustable non-slip foot: adjust the distance between the bottom of the product and the cabinet surface, suitable for the display rack containing electronic products. 2) Non-adjustable non-slip foot: the distance between the bottom of the product and the cabinet surface is fixed, which is suitable for the display rack without electronic products. | ||
