Diameter of round pipe: our company adopts 12mm diameter, which can be selected from 10mm-15mm according to the weight of goods.
2. Round pipe on the top
1) For the sake of beauty and safety, each corner of the pipe is not a sharp right angle, but a rounded corner with a radian of 30. Rounded corner radians can be selected between 25 and 45.
2) The two diverging round pipes are fastened and connected to the y-bracket with M3 cross screw. Screws cannot be hidden, so it is not recommended to use screws larger than M3. The bigger the screw cap, the lower the aesthetics.
3) Clothes or trousers can be displayed directly on the pipe. Remove the screw from the pipe, and lock the screw after the pipe passes through the clothes, so that the clothes can be more intuitive and better displayed.
3. Y-bracket
1) The round pipe is made of welding technology
1) The "inverted Y" support feet at the bottom have an opening width of 36cm, which can be selected from 30cm to 40cm. It is recommended that the width of the supporting feet should be the same as the width of the wooden frame to ensure the stability of the clothing shop fixture.
Display in the middle of the showcase
1. Applicable wood
1) MDF: can be pasted with dark or light wood grain, and can also be painted. The cost is lowest, so we use.
2) Solid wood: it can be sprayed with varnish or other special colors as required, with the highest cost.
3) Plywood: it can be pasted with dark or light wood grain and painted, the cost is moderation.
2. Wood frame size
1) Standard size: length 72.5 x width 36 x height 50 cm.
2) Other sizes: can be customized according to actual needs. In order to maintain the elegant appearance of the botique display stand, it is recommended not to exceed 80cm in length, 50cm in width and 60cm in height.
3. Fixed mode
1) On the y-type bracket, the iron plate with holes is welded. After locking the screws, the wooden frame can be fixed, and the screws are hidden under the wood board to maintain a beautiful appearance.
2) Universal glue can also be used to paste the wooden frame onto the Y bracket, but it cannot be removed, which is not flexible enough.
4. Function of wood frame
1) Store pants, shirts, or t-shirts.
2) Display plants, magazines and other items to decorate the store.
Some parts are stamped using ordinary stamping molds, and the top of the bracket is equipped with adjustable sliding accessories.
Glass Shelf
1. Applicable glass types
1) Plain glass
2) Tempered glass (used by our company)
3) Embossed glass
4) Wired glass
5) Insulating glass
2. Fixed mode
1) Slot mode: plane a slot on the inside of both sides of the wooden frame, the width of the slot should be 0.5mm - 1.0mm larger than the glass thickness, and the depth of the slot should be between 3mm - 5mm, making the glass not only can be easily inserted into the slot, but also can be firmly fixed in the slot, convenient to use.
2) Metal plate support + glass glue: use screws to lock the metal plate to the inside of both sides of the wooden frame, and use glass glue to bond the glass layer shelf after placing the plate to ensure the firm glass layer shelf, but the glass layer shelf cannot be removed, which is inconvenient to. The post worker threads the circular hole.
{"type": "4"}
Name
Metal Display Shelf Clothing Garment Display Stand
Texture
1. Iron plate: the thickness of the top iron plate can be used for 0.8-1.0mm
and the thickness of the bottom iron plate
can be used for 1.0-1.5mm.
2. Stainless steel square pipe (support pipe) : tube wall thickness can be selected from 0.8 - 1.2mm
keep the original color of stainless steel. 2) Other colors can be electroplated
such as gold
rose gold
bronze
etc.
Dimensions
Standard size: small -- W80 x D45 x H150 cm
medium -- W100 x D50 x H155 cm
large -- W120 x D55 x H170 cm.
Customized size: according to the size of
f the goods and the required quantity of goods.
Disassembly Structure
1. This underwear display rack contains stainless steel and iron materials. Iron materials need powder coating
while stainless steel does not need powder coating. 2. The packaging volume of the assembly structure is twice that of the disassembly structure
and the disassembly
Fabrication Process
Laser Cutting / Folding / Forming / Punching
Welding / Painting / Powder Coating
Shearing / Stamping/ Polishing
Drawing Format
PRO-E
Auto CAD
Solid Works
UG
CAD / CAM / CAE
PDF
Materials Used
AL1060
AL6061
AL5052 Steel
mild steel
SPCC SS201
SS303
SS304
SS316
SS316L
Galvanized sheet
Special requests
Gauge Size / Thickness (Laser)
25mm Max Carbon Steel
30mm Max Stainless Steel & Aluminum
Logo
Screen printing
laser marking
UV printing
Surface Finish
Powder coating
bead blasting
anodizing
electroplating
polishing
brushing
painting
screen printing
etc
Industry Standard
ISO 9001: 2015
Sheet Metal Products
Stand & Fill Protein Feeder
Brackets / Enclosures /Box/ Sheet metal parts / Frames/Cabinets
{"type":"2","json":[{"index":"0","tran_label":"Name","tran_value":["Metal Display Shelf Clothing Garment Display Stand"]},{"index":"1","tran_label":"Texture","tran_value":["1. Iron plate: the thickness of the top iron plate can be used for 0.8-1.0mm","and the thickness of the bottom iron plate","can be used for 1.0-1.5mm.","2. Stainless steel square pipe (support pipe) : tube wall thickness can be selected from 0.8 - 1.2mm","size is \r\n\r\nrecommended to use 40 x 40mm","50 x 50mm","60 x 60mm (our company)","70 x 70mm or 80 x 80mm.","3. Stainless steel round pipe (hanging rod) : tube wall thickness can choose 0.5 - 1.0mm","tube diameter is \r\n\r\nrecommended to use 8mm","9mm","10mm (our company)","11mm or 12mm.","Remark: for indoor use","201 stainless steel is recommended.For outdoor or coastal areas","304 or 316 stainless","steel is recommended."]},{"index":"3","tran_label":"Surface Treatment","tran_value":["1. Iron plate\r\n\r\n1) The conventional color is powder coated with semi-gloss black","high-gloss black","matte black or frosted black.\r\n\r\n2) Paint is used for special color","and paint can also be used for gradual color.","2. Stainless steel square pipe and round pipe\r\n\r\n1) Conventional wire-drawing surface","or according to the need to choose mirror","sand or sandblasting","keep the \r\n\r\noriginal color of stainless steel.\r\n\r\n2) Other colors can be electroplated","such as gold","rose gold","bronze","etc."]},{"index":"12","tran_label":"Dimensions","tran_value":["Standard size: small -- W80 x D45 x H150 cm","medium -- W100 x D50 x H155 cm","large -- W120 x D55 x H170 cm.","Customized size: according to the size of","f the goods and the required quantity of goods."]},{"index":"4","tran_label":"Disassembly Structure","tran_value":["1. This underwear display rack contains stainless steel and iron materials. Iron materials need powder coating","while \r\n\r\nstainless steel does not need powder coating.\r\n\r\n \r\n\r\n2. The packaging volume of the assembly structure is twice that of the disassembly structure","and the disassembly"]},{"index":"5","tran_label":"Fabrication Process","tran_value":["Laser Cutting / Folding / Forming / Punching","Welding / Painting / Powder Coating","Shearing / Stamping/ Polishing"]},{"index":"2","tran_label":"Drawing Format","tran_value":["PRO-E","Auto CAD","Solid Works","UG","CAD / CAM / CAE","PDF"]},{"index":"6","tran_label":"Materials Used","tran_value":["AL1060","AL6061","AL5052\r\nSteel","mild steel","SPCC\r\nSS201","SS303","SS304","SS316","SS316L","Galvanized sheet","Special requests"]},{"index":"7","tran_label":"Gauge Size / Thickness (Laser)","tran_value":["25mm Max Carbon Steel","30mm Max Stainless Steel & Aluminum"]},{"index":"8","tran_label":"Logo","tran_value":["Screen printing","laser marking","UV printing"]},{"index":"9","tran_label":"Surface Finish","tran_value":["Powder coating","bead blasting","anodizing","electroplating","polishing","brushing","painting","screen printing","etc"]},{"index":"10","tran_label":"Industry Standard","tran_value":["ISO 9001: 2015"]},{"index":"11","tran_label":"Sheet Metal Products","tran_value":["Stand & Fill Protein Feeder","Brackets / Enclosures /Box/ Sheet metal parts / Frames/Cabinets"]}]}
FAQs
Q1: Where can I get product & price information?
A: Send us an inquiry e-mail huxanhe@zsyishang.com, we will contact you as we receive your mail.
Q2: How long can I get the sample?
A: Depends on your specific items, within 3 - 7 days is required generally.
Q3: What kinds of information you need for a quote?
A: Kindly please provide the product drawing in PDF, and will be better you can provide in STEP or IGS
Q4: what's the payment terms?
A: We accept 50% as payment deposit when the goods are done, we take photos for your check and you then pay the balance.
Q5: What shall we do if we do not have drawings?
A: Please send your sample to our factory, then we can copy or provide you better solutions. Please send us pictures or draftswith dimensions (Length, Height, Width), CAD or 3D file will be made for you if placed order.
Q6:Can we get some samples before mass production?
A: Absolute. However, the shipping cost of the sample will be paid by the customer.
Q7: Is it possible to know how are my products going on without visiting your company?
A: We will offer a detailed production schedule and send weekly reports with pictures or videos which show the machining progress.
Looking for a trustworthy sheet metal manufacturer ?
From rapid prototyping to full-scale volume production, all custom services are performed in-house at our ISO certified factory here in China. We are ready and willing to go the extra mile to produce outstanding work for you.
