Custom Metal Fabrication for Lighting Fixtures & Equipment
Who We Manufacture Lighting Metal Parts For
Lighting Fixture OEMs
Commercial & Architectural Lighting Manufacturers
Decorative Lighting Manufacturers
Build-to-Print Projects
Fabrication Capability Built Around Lighting Product Requirements
Carbon Steel · Stainless Steel · Aluminum
Sheet · Plate · Formed Components
Laser Cutting · Punching · Holes · Slots · Profiles
Bending · Forming · Deep Drawing where applicable
MIG · TIG · Spot Welding
PEM Nuts · Studs · Rivet Nuts · Mounting Hardware
Powder Coating · Brushing · Painting · Anodizing · Plating
Prototype → Repeat Production
Metal Parts We Manufacture for Lighting Fixtures
Lamp Bases & Mounting Plates
Metal Housings & Decorative Covers
Canopies, Cups & Formed Lighting Parts
Brackets, Frames & Internal Supports
Decorative Panels, Trims & Visible Metal Parts
Fabricated Lighting Assemblies
What Lighting Buyers Can Verify Before Sending Drawings
26+ Years
ISO 9001:2015
100% Final Inspection
Prototype → Repeat Production
Fabrication Details That Affect Lighting Product Appearance & Assembly
Formed Shape & Symmetry
Hole & Mounting Alignment
Visible Surface & Finish Consistency
Edge, Joint & Assembly Fit
Where These Metal Parts Are Used in Lighting Products
Commercial Lighting
Architectural Lighting
Decorative Lighting
Industrial & Equipment Lighting
Materials & Finishes for Lighting Metal Parts
Materials
Finishes
From Your Lighting Drawings to Repeat Production
Review the Drawings
Check DFM & Appearance Risks
Approve the Sample
Produce, Inspect & Protect
What Lighting Buyers Usually Ask Before an RFQ
Can you manufacture lighting bases, housings and mounting parts from our drawings?
Yes — we fabricate lighting metal parts directly from customer drawings and 3D models. We review your STEP, DXF, DWG or PDF with the material, thickness and finish you specify, then confirm the manufacturable approach before quoting.
Can you produce formed or deep-drawn decorative lighting parts?
Yes, where the part geometry suits our forming and deep drawing capability. Forming, deep drawing and assembly work is confirmed against the actual drawing and planned tooling, so the final method is agreed before production.
How do you control visible-surface consistency after forming and finishing?
Visible surfaces and finish requirements are captured at the drawing review stage, then checked against agreed samples during production. Brushed direction, coating and plating are treated as inspection points so repeat parts match the approved sample.
Can you install studs, PEM hardware or other mounting components?
Yes — we install PEM nuts, studs, rivet nuts and other mounting hardware as part of the fabrication. Hardware positions are set from your drawing and verified during final inspection.
Can you support prototypes before repeat lighting production?
Yes — sample approval is built into our workflow. We confirm dimensions, appearance, fit and finish on the sample before moving into repeat production.
Can different finishes be coordinated across one lighting product or assembly?
Yes — finish coordination is part of the drawing review, so all parts in one assembly are planned against the same finish specification. Each part is then inspected to that agreed standard before shipment.
Send Your Lighting Drawings. We'll Review Manufacturability Before Production.
Share your drawings, material, quantity, finish and mounting requirements for an initial manufacturing review and quotation.
